Meguiar's Mirror Glaze Ultra Finishing Polish M20508

• Low cutting grade: 4/10
• Advanced technology formulation for deep & rich shine without "holograms"
• Permanently removes "swirls" and light defects from all colors
• Provides deep reflections and high gloss
• With a smooth polishing feel and quick cleaning
• BSS - Suitable for body shops

APPLICATION METHOD:

• Use by hand or with a DA random orbital polisher or rotary polisher

Instructions:

• SHAKE WELL. Apply on a clean, cool surface and only after the car's paint has dried and cured properly.
• With DA Random Orbital Polisher: Apply the polish directly onto the pad (DFP5). Set the polisher to 4-5 (For the MT310 at 3,800-4,800 opm’s). Apply moderate pressure for the first 2-3 passes and then light pressure for the next 2 passes. Wipe off residues immediately after each panel.
• With Rotary Polisher: Work in sections. Set the polisher to 1000-1500 RPM’s and use a polishing pad (WRFP7). Prepare new or dry pads by misting with M34 Final Inspection. Apply the polish directly to the paint and work on a 5x5 inch area with overlapping passes. Continue until a thin layer remains. Wipe off residues with a microfiber cloth (X2010EU or E101).
• For a hologram-free finish, apply moderate pressure in the initial passes, then gradually reduce to very light pressure in the final passes.
• For optimal results, regularly wash the application pads.